The High Speed Cutting Machine is specifically Designed to cut board, Plastics, Aluminum, PVC Film, Wood Veneers, Asbestos board, Emery Cloth, Rubber and Leather as well as other Sheet Material that is to be cut with precision and speed. The Friends Makes 115 EMC, High Speed Cutting Machine is a high performance machine designed specifically for the Paper Mills, Offset printers, Print shops, Book Binders , Copier paper industry and stationary industry.
Programmes
The Storage capacity of the programme is 99 programmes and one programme capacity is 99 cuts in this machine. The accuracy of the programme is 0.01 mm 0.001 inch. Conversion from mm to inch fraction is also possible. The programme controls the backguage with double speed. The machine has a 1:6 ratio motor is installed for very accurate clutch brake system.
Control through upper moving system Perfecta (Seypa) Type. The screw is running on ball bearings. Back-gauge guide moves at grinded pillar.
The worm gear drive has ground worm and needs less power than any other conventional drive. The gears are running in oil bath.
Helps to move the paper stack very easily.
An advance design, together with new technology concepts have account for increasing rationalization and the consequent performance requirements. Friends range now has a new drive Mechanism for clamping. The special features of this machine are double clamping pressure and gentle setting of the clamp on the paper to be cut. The clamping pressure is adjustable with a knob positioned under the table at a convenient place.
A Beam of light falls across the Knife width, on the paper to be cut without lowering the clamp. This ensures proper cutting.
The knife can be changed easily by lift system and safely by a single operator.
Guard A set of infra red light beams are projected in front of the cutting zone just above the table to avoid an accident.
| TECHNICAL DATA | |
| Number of Programmes | 99 |
| Max Stop Number | 99 |
| Measuring System | Alternate ( in millimeters and Inches ) |
| Cutting Width (mm / Inch) | 115 cm per 45 ¼” |
| Clamp opening (mm / Inch ) | 14 cm per 5 ½” |
| Smallest Remainder Strip | 1.5 cm(0.5″) |
| Deep Depth (mm / Inch) | 115 cm per 45 ¼” |
| Power required | 5 H.P (for Main Drive) |
| Back Gauge Drive | 1 H.P. |
| Air Blower | 1 H.P. |
| Front Table Length | ½” |
| Clamp Pressure (Min.) | 100 |
| Maximum Pressure | 3700 |
| Table Height of the machine | 33″ |
| Capacity cuts per minute | 42 cuts |
Friction clutch system for maximum efficiency and minimum maintenance.
Rapid type hand clamp and Foot Clamp for smooth and easy operation.
Easy replacement of knife. Fine adjustment of knife height by eccentric levers.
Adjustable back gauge for accurate parallelism with knife edge. Device provided with locking arrangement to avoid shift in the position of back gauge during operation.
Safety and saving of space.
Centralised lubrication of moving parts.
|
TECHNICAL DATA
|
|||
|---|---|---|---|
We understand that our clients’ tastes are different and that they would require different sizes of bags at different times. The blade and gear adjustments of our machine make the process of creating bags look very easy and simple.
Jenan Overseas Exports handmade paper bags may get damaged due to a slight human error at times. However, in the case of paper bag making machines, there is no chance of error at all as the settings are pre-set, and the process is 100% automatic.
Paper bag machines run on electricity, but the good thing is that they don’t consume a lot of power. Also, our machines are very well-maintained; therefore, they don’t breakdown frequently. Most of the paper bag machines across the world use very good technology.
A paper bag machine, on the other hand, saves you a lot of time as they use sophisticated cutting and designing tools to create tailor-made bags to suit your requirements.
